Header_ToolSetter

XTREME Blades, Reamer Accessories and Toolsetters

XTREME Blades (Coated & Uncoated)

PVD Coatings For Blades

Titanium Nitride (TIN): Good all purpose coating for steels, irons and plastics. Helps in reducing build up on cutting edges and achieving micro finishes.

Titanium Carbon Nitride (TICN): Good for carbon steels alloy steels, & cast irons. Helps in achieving micro finishes. Examples are 1215, 12L14, 4140, 4130 materials, TICN is more wear resistant than TIN.

Titanium Aluminum Nitride (TIALN): Good for cast irons, and steels. A multi layered coating with aluminum to help with heat & oxidation resistance.

Carbide-Tipped Coolant-Fed Reamers
XR-125Fits Reamers XR-0380 to XR-0480Coated
XR-125-UFits Reamers XR-0380 to XR-0480Uncoated
XR-185Fits Reamers XR-0510 to XR-1500Coated
XR-185-UFits Reamers XR-0510 to XR-1500Uncoated

XTREME Reamer Accessories

XR Clamp B (Reamers XR-0390 to XR-0480)
XR Clamp C (Reamers XR-0510 to XR-01500)
XR Clamp Screws
XR Blade Set Screws (2)
XR Torque Wrench (for clamp screw)
XR Replacement Tip For Torque Wrench
XR Set Screw Wrench (to set blade)

XTREME Toolsetters

Proto-Cutter tool setters are excellent for reading TIR (total indicator run out) on any tools or parts between centers, setting the blade and back taper on the Proto-Cutter XR Reamer. They come with a spring loaded center for easy release and 1 fixed center.

XR Tool Setter-1 is a bench center that measures tools up to 4″ in diameter and 12″ long. 2 Mahr Federal gages reading .00005 increments come with the tool setter.

Carbide-Tipped Coolant-Fed Reamers

XR Tool Setter-2 is a bench center that measures tools up to 4″ in diameter and 24″ long. 2 Mahr Federal gages reading .00005 increments come with the tool setter.

Carbide-Tipped Coolant-Fed Reamers

Request Information

Contact Form

101 South Liberty Avenue.
Suite 1
Freeport, IL 61032
Toll: 800.851.2874 Fax: 815.233.9279
sales@protocutter.com

Follow by Email
Facebook
LinkedIn
Twitter
RSS